Low Voltage LED Underwater Pond Light

LED Landscape Lighting - LED Accent Lights - LED Pond Lights

Why Use LEDs? <---- Click Here

Hadco LED White Paper

LED Underwater 25 Degree Outdoor Pond Light

Impressive high quality LED pond light from Hadco. For use in pond applications with suitable transformer.

SPECIFICATIONS

• 12 Volt
• 12.4 total watts
• Four (4) Type III Luxeon High Output Low Voltage LEDs
• Intergral voltage regulator, suitable for standard remote low voltage transformers

HOUSING: Single piece injection molded fiberglass reinforced ULTEM High Performance Polymer.

LENS RING: Single-piece injection molded ULTEM High Performance Polymer with gasketed lens. Twist-off for easy access.

Finish Color impregnated Bronze

Dimensions 6 11/16" H x 5 1/8" W

Lens Convex lens is clear; high temperature tempered glass furnished with silicone O-ring for watertight seal.

LED Type III Luxeon High Output LED, powered 700mA DC to operate for 50,000 hours.

Electrical Input voltage range (VAC): 10.8-17.5 volts, regulated to 12 Volt DC. Integral surge protector.

Optics Intergral Flood 25 Degrees

Wiring 36" of usable #18-2 leads. Cable connector supplied with fixture.

Warranty Three-year limited warranty.

Lamping Type III Luxeon white high brightness (HB) LEDs. Deliver 70% lumen maintenance at 50,000 hours. Cool white (5500K nominal).

Certification UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.

IP Rating IP66/68 to 1M (3.28FT): Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion up to a depth of 1 meter (3.28 feet)

Electrical Assembly Powered by Advance: Integral Advanceelectronic LED driver with integral surge protector. UL class2. -40ºC/F minimum starting temperature. Low voltage transformer must be ordered to power the fixtures. Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. Integral surge protector built into LED driver circuit. 12 volts, 12.4 total watts. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Additional Housing Info Cool external temperatures - all below 38ºC - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (85ºC for composite, 80ºC for glass) and 4 seconds (74ºC for composite, 70ºC for glass) of contact. One-piece injection molded ULTEM® High Performance Polymer composite. Lens ring is a Single-piece injection molded ULTEM® High Performance Polymer with gasketed lens. Twist-off operation for ease of maintenance. Fasteners are 300 series stainless steel.

More Information

Download Specification Sheet

Instruction Sheet

Hadco Professional Landscape Lighting